For example, GPI 04 triggers GPI input 4. If the GPI is assigned as an output, no action is performed. Performs the action assigned to the GPI input xx. For example, CC 105 triggers custom control 5 on bank 1. Table 1: RossTalk Commands Description Executes custom control (cc) on bank (b). Command CC bcc FTB GPI xx Note: All commands are case sensitive. The exact commands and how the switcher reacts to the commands is outlined in the following table. Carbonite Supported RossTalk Commands The switcher supports a number of RossTalk commands. At the prompt, enter the commands you want to send to the switcher. The default IP address of the switcher is 192.168.0.123. Create a network connection to the switcher on port 7788. To Send RossTalk Commands to Carbonite Note: Each command should be terminated by a carriage return and a line feed (CR/LF). This allows you to perform various functions such as triggering a GPI, or sending commands to the switcher, such as transitioning a key. Sending RossTalk Commands to the Switcher The switcher accepts RossTalk commands over ethernet on port 7788. These commands can be sent to the switcher over an ethernet connection. Carbonite Commands The switcher can be controlled from a remote editor or computer via RossTalk commands. This option allows you to trigger a Custom Control.RossTalk Commands RossTalk is a plain text based protocol that allows control of Ross Video equipment. If you try to trigger a GPI output, nothing will happen. This option allows you to trigger a GPI input and whatever action is assigned to it. However, it uses the auto transition when turning the key on and off. This setting works like Key Cut with the same settings. The Key Cut setting let's you turn the selected Key on and off using a cut transition. ME and MME are also supported on Carbonite and Graphite switchers depending on your specific model. ![]() MLE is a legacy mode that works with Vision and Acuity. The Key Cut command defaults to using the ME as the Bus Source, but it still supports MLE and MME (Mini-ME). The Fade To Black command performs a fade-to-black transition. You can also assign multiple actions to a single slide. You can edit or remove any action by right-clicking on the slide with an action assigned to it. If the command you select has additional options, a second window will open after selecting it. Right-click on any slide, select Add Action, select Communication, select RossTalk, and then select the command you want to send. RossTalk commands are added as slide actions. ![]() You will see a green line to the left when it is connected. You may also want to change the name to match whatever you're controlling to make it easier to identify it.Ĭlick the Back button and then click on Connect to enable the device. The only setting that you need to change is the Address and Port to connect to your specific RossTalk device. You will see the settings window after selecting it from the list. RossTalk allows ProPresenter to control a variety of settings on different Ross switchers.Ĭlick the + to add the RossTalk device. At this time, RossTalk is only an available option on Mac.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |